Bill Posted September 14, 2006 Report Posted September 14, 2006 Hey,how do you get the roller bearings out of the swingarm without damaging them.The bearings where the swingarm bolt goes.thanks Quote
CFM Posted September 15, 2006 Report Posted September 15, 2006 Hey,how do you get the roller bearings out of the swingarm without damaging them.The bearings where the swingarm bolt goes.thanks Don't bother trying, just replace them. PM me and I'll get you a set at my cost --Scott Quote
endofitall9 Posted September 15, 2006 Report Posted September 15, 2006 ltake the swingarm bolt out. remove the swingarm and the bearing should come right out with now prob.unless they are in bad shape that is. Quote
Bill Posted September 15, 2006 Author Report Posted September 15, 2006 Well lets say there not budging,sooo do I pound them out? Quote
Bansh-eman Posted September 15, 2006 Report Posted September 15, 2006 its not a bad idea to buy a bearing remover kit they cost like 50 bucks but hey are great. and work for most sizes Quote
dajogejr Posted September 15, 2006 Report Posted September 15, 2006 You're going to spend an hour pounding them out, heating it up...etc., only to realize you damaged them and can't reuse them. The bearing and seal kit is about 50 bucks...trust me, it's worth it!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.