KEVSWS6 Posted September 12, 2006 Report Posted September 12, 2006 Oct 7 at Dumont dunes. I'm trying to get ready if I can get on top of my work load. Should be lots of fun. Whos going from here? Quote
KEVSWS6 Posted September 12, 2006 Author Report Posted September 12, 2006 I'm in with three others What class you guys running in? I'm trying the 350-400 Alky class. Trying to get out Thursday night. Quote
Animalman294 Posted September 12, 2006 Report Posted September 12, 2006 Damn, I wish I could make it, I'm gonna be on vacation around that time, then Glamis in November........... Quote
darkside Posted September 12, 2006 Report Posted September 12, 2006 What class you guys running in? I'm trying the 350-400 Alky class. Trying to get out Thursday night. first time so what classes are there? Quote
Polish Posted September 13, 2006 Report Posted September 13, 2006 I did not know that there was any classes...........how does it work?.......registration?.....ect.......ect......what day do the races start?............Gimmie gimmie some info!!!! Quote
LiftdT4R Posted September 13, 2006 Report Posted September 13, 2006 Not to be an asshole, but the roman numeral for 4 is IV not IIII. Quote
KEVSWS6 Posted September 13, 2006 Author Report Posted September 13, 2006 Not to be an asshole, but the roman numeral for 4 is IV not IIII. Thanks for that correction :baseball_bat: Quote
KEVSWS6 Posted September 13, 2006 Author Report Posted September 13, 2006 I did not know that there was any classes...........how does it work?.......registration?.....ect.......ect......what day do the races start?............Gimmie gimmie some info!!!! You can sign up when you arrive. Here are the classes. Outlaw Class 2 stoke, 4 stroke (run what you brung and hope you brung enough!) 21mm-26mm 18mm 20mm 16mm 14mm and 12mm 10mm and under BIG MANS CLASS. Rider must weigh 210lbs or over. Bike can be NO bigger than a 10mm, Aftermarket cylinders OK 10mm Aftermarket cylinder 550 cc max 10mm Stock Cylinder 7mm and 8 mm Aftermarket cylinder 550cc max 7mm and 8mm Stock cylinder Aftermarket frame ok 4mm After market cylinder Aftermarket frame ok 500cc max 4mm Stock Aftermarket frame ok 400- 550cc gas only,Stock or stock modified frame only 350- 400 ported and polished alky or gas Stock or stock modified frame only 350 Port and Polish (any Stage) Aftermarket carbs, pipe. Gas only. 350 ported and polished, pipe, stock carbs, stock frame. Gas only. 350 stock carbs, stock frame. gas only. pipe ok. stock or stock modified frame only. (this class is for stock banshees) 4 stroke Stock, pipe only 500- 700cc 4 stroke 500cc and under Quote
98bonerSTOCKshee Posted September 13, 2006 Report Posted September 13, 2006 You can sign up when you arrive. Here are the classes. Outlaw Class 2 stoke, 4 stroke (run what you brung and hope you brung enough!) 21mm-26mm 18mm 20mm 16mm 14mm and 12mm 10mm and under BIG MANS CLASS. Rider must weigh 210lbs or over. Bike can be NO bigger than a 10mm, Aftermarket cylinders OK 10mm Aftermarket cylinder 550 cc max 10mm Stock Cylinder 7mm and 8 mm Aftermarket cylinder 550cc max 7mm and 8mm Stock cylinder Aftermarket frame ok 4mm After market cylinder Aftermarket frame ok 500cc max 4mm Stock Aftermarket frame ok 400- 550cc gas only,Stock or stock modified frame only 350- 400 ported and polished alky or gas Stock or stock modified frame only 350 Port and Polish (any Stage) Aftermarket carbs, pipe. Gas only. 350 ported and polished, pipe, stock carbs, stock frame. Gas only. 350 stock carbs, stock frame. gas only. pipe ok. stock or stock modified frame only. (this class is for stock banshees) 4 stroke Stock, pipe only 500- 700cc 4 stroke 500cc and under Banshee Wars I am assuming the 4 stroke classes are for the cross-breed shee's, am I right? Quote
KEVSWS6 Posted September 15, 2006 Author Report Posted September 15, 2006 Banshee Wars I am assuming the 4 stroke classes are for the cross-breed shee's, am I right? No they are 4 stroke friendly. Bring your Raptor or 450 out and run it. Quote
baddsheee Posted September 15, 2006 Report Posted September 15, 2006 My cylinders are being shipped today to get ported (Passion). If I get them back in time, I'll definately try to make. Quote
jakers4369 Posted September 15, 2006 Report Posted September 15, 2006 My cylinders are being shipped today to get ported (Passion). If I get them back in time, I'll definately try to make. I will be thert for sure! Im runnin in the 350-400 alky class as well Quote
SoCalinIt Posted September 15, 2006 Report Posted September 15, 2006 I just sold my YFZ450, so this will be my first trip out with the Banshee's. Can't wait to see how shee runs! Maybe I'll run the stock calss?!?! Could be fun! What is the fee? Quote
KEVSWS6 Posted September 15, 2006 Author Report Posted September 15, 2006 I just sold my YFZ450, so this will be my first trip out with the Banshee's. Can't wait to see how shee runs! Maybe I'll run the stock calss?!?! Could be fun! What is the fee? They do have a stock gas carb class. Just pipes and filters. I don't know the price but it isn't much. I will be thert for sure! Im runnin in the 350-400 alky class as well I'll be running in the same class. Cant wait. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.