onetwistedaccord Posted August 31, 2006 Report Posted August 31, 2006 On my banshee the vent inside the water pump cover is pumping case oil out into the hoses onto the ground????? Only after warmed up and driving???? Any thoughts Quote
BigRed350x Posted August 31, 2006 Report Posted August 31, 2006 On my banshee the vent inside the water pump cover is pumping case oil out into the hoses onto the ground????? Only after warmed up and driving???? Any thoughts Sounds like too much oil or one of the other breather hoses is clogged up or plugged. Its getting hot, sloshing around and building up enough pressure to leak out. Check the breather hose comming from the rear of the engine and make sure its not plugged. Then check to be sure you aren't over-filled on oil. Quote
FireHead Posted August 31, 2006 Report Posted August 31, 2006 On my banshee the vent inside the water pump cover is pumping case oil out into the hoses onto the ground????? Only after warmed up and driving???? Any thoughts Did this just start doing it or did you do something to aid this process along recently? :baseball_mitt: Quote
onetwistedaccord Posted August 31, 2006 Author Report Posted August 31, 2006 thanks i got it.. yeah i just got done redoing from the ground up.. the other breather hose bent in half ran new line fixed thanks again Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.