Crank Replacing?

[IROOST1]

I guess I have to replace the crank bearings on my 01 motor. It sucked sand. What do I need to do to get it out of the cases. Is it hard. And what do I all need to buy to replace. Gaskets, crank bearings and seals, Do I need rod bearings. Let me know. I have never done a banshee crank before. how much should I expect to pay to have the bearing pressed in? OR should I just buy a new complete crank on ebay. Its 250 plus shippin. Which would be cheaper. Any help would be appreciated.

[BigRed350x]

I guess I have to replace the crank bearings on my 01 motor. It sucked sand. What do I need to do to get it out of the cases. Is it hard. And what do I all need to buy to replace. Gaskets, crank bearings and seals, Do I need rod bearings. Let me know. I have never done a banshee crank before. how much should I expect to pay to have the bearing pressed in? OR should I just buy a new complete crank on ebay. Its 250 plus shippin. Which would be cheaper. Any help would be appreciated.

 

http://www.bansheehq.com/forums/index.php?...tting+the+cases

[TwinPipeDaddy]

If you know anything about doing engine work you will be fine. Main thing: Get a manual and Yamabond! Torque specs are critical. I'd stay away from ebay. The seals in these things will trash your power plant if they cross leak. (had it happen) Definatly take the time to pressure test it before you put it back on the frame.

http://www.mrcrankshaft.com/