arlis Posted August 17, 2006 Report Posted August 17, 2006 i just got my O6 SHEE and went ahead and bought t5's k&n clamp on's (pods) and vforce3 i live in oregon and ride at sea level what should my jetting specs be at? Quote
Snopczynski Posted August 17, 2006 Report Posted August 17, 2006 i just got my O6 SHEE and went ahead and bought t5's k&n clamp on's (pods) and vforce3 i live in oregon and ride at sea level what should my jetting specs be at? consult toomey, they actually probably have jetting specs on their website. Quote
Ting Ting Posted August 17, 2006 Report Posted August 17, 2006 Start with a 340 main might need one leaner 27.5 pilot and middle clip on the needle and 1.5 to 2 turns on the air screw Quote
dajogejr Posted August 17, 2006 Report Posted August 17, 2006 consult toomey, they actually probably have jetting specs on their website. HELL NO... Their jet kit is way lean, I don't care what they say... Their kit comes with dynojet needles (longer and richer) and 270 and 280 mains. You should be ok with stock pilots...I could run 27.5 or 25's in mine... TingX2 is right... 340 and check plugs....you should be safe with that... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.