Rebel3190 Posted July 17, 2006 Report Posted July 17, 2006 With a 68mm bore cheetah cub 4mil stroker motor could i run a +4 swingarm and still keep the front end down? Quote
sheefreak Posted July 17, 2006 Report Posted July 17, 2006 No, not really. I don't think it would be uncontrollable but if you want to do some draggin or hill climbing, better go w/at least a 6 preferably a plus 8. I run a 6 on a drag port oem cylinder, +4 stroke, and have to sit on the tank when I launch to keep from not going over backward. But the 6 is about as far as you wanna go if you don't want to lose dunability. Quote
Animalman294 Posted July 19, 2006 Report Posted July 19, 2006 Thats the age old question, +4 or +6. Some say go with the +6 and they ae still dune-able, but other's say that turning a +6 is hell. Yet others say go with the +4 because they are dune-able and allow you to drag, but you can't let off with a w.o.t. launch. Then there is the other crowd that says that you can do either one, but you have to gear it right and get the right paddles.............. :beer: I can't decide......................... :: Quote
Skidmark Posted July 20, 2006 Report Posted July 20, 2006 +4 and +6 have basically the same handling. Its all about how you ride and the tires. Even a stock lenght shee can handle crappy if you have BIG agressive paddles on it. I run +6 on my banshee and the front stays down, you can still get it up if you try though. Quote
kb01shee Posted July 23, 2006 Report Posted July 23, 2006 If you still want to play and drag run a +4 but if all you do is drag then deffinalty get the +6. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.