no clutch

[luisg1]

hi guys, so i just got my engine back together after having ti take it all apart to change seized clutch push rod. Now that is all together seems like did something wrong. k, i got it together when to started, it start right away but when it was warmed up put it in 1st gear and let go the clutch, nothing happened, did not move forward, did not die, nothing :: :: .i try to adjust the screw on the clutch and it looks like i keep loosing it and it get better but at this point the lever on the handlebar is totally loose, like it have no tension, so i dont know if i put something in the wrong place or if is the cable, wich im going to change anyways but the stupid places around dont keep it in stock :shoothead: so ill have to order one and wait till gets here. any ideas?? ill really apreciate you guys help. Thanks.

 

 

luisg1

[bansheeseat$$]

Did you remember to put the steel ball back in between the rod and the hub adjuster?

[batoutofshell]

Make sure the pressure plate is not stripped in the center, just happened to me last Sunday and had to have the shop at the Badlands weld it so I could ride!!It got pretty hot so I am replacing the rod and ball also their cheap enough. Got the new parts today to fix it Monday so its ready to go next weekend!Why did you take the motor apart you can get it out by using a auto pencil magnet and pul it out?

Edited June 18, 2006 by batoutofshell

[LeadBoots]

make sure that u did not over adjust the clutch adjuster

[luisg1]

To: bansheeseat$$, yes the ball is installed. btw yor engine looks awesome

To: batoutofshell, the press plate look ok and i had to opened cause it was welded to the push lever too.

To: LeadBoots, no is not over adjust cause like i posted first right now is relly loose where the lever on the handlebar is totally loose.

 

But thanks for triying to help. :beer:

 

any other ideas????????

 

 

 

 

luisg1

Edited June 19, 2006 by luisg1

[tprattii]

To: bansheeseat$$, yes the ball is installed. btw yor engine looks awesome

To: batoutofshell, the press plate look ok and i had to opened cause it was welded to the push lever too.

To: LeadBoots, no is not over adjust cause like i posted first right now is relly loose where the lever on the handlebar is totally loose.

 

But thanks for triying to help. :beer:

 

any other ideas????????

luisg1

 

 

 

Did you make sure that you put both thrust washers on. It does exactly what you are explaining if you forgot one of them. I know from experience.