UPP Chain Slider Install

[SHEEBANSAVAGE]

Hey guys, I am in the process of installing the UPP cahin slider kit on my shee and I have a quick question. Which roller goes on the top and which one goes on the bottom?

 

Thats all for now

[pipebomb]

the smaller one goes on the top(should be 34mm) and the larger one on the bottom( either 39 or 42mm depending on which they include in the kit)

[dajogejr]

I gotta be honest, I got the UPP chain slider kit from Magic. Comes with both rollers, swingarm slider, front and rear.

 

I don't remember either of the chain rollers being bigger than the other....and I do remember checking...

 

This is interesting....

 

[WALLACE84]

Ive been looking for a complete kit like this and havent found one with everything in it. You say magic racing has one? guess I didnt look to hard thanks

Edited June 7, 2006 by WALLACE84

[pipebomb]

get it from Magic or right from UPP themselves.

 

http://www.uppracing.com/

[odaen]

modquad sells them too

 

the upp kit has the same size rollers if I remember right. the slider that goves over the pivot tube in my upp kit was defective. the nut spun inside the plastic, so i bought the modquad kit and eventually pulled my swingarm off and put it on.

[dajogejr]

Actually...now that I think of it. I won from HQ a mod quad roller bearing and water pump cover...

I used one of those, and one from the UPP.

 

I did my cub and swingarm at the same time, so I just bolted the swingarm sliders onto my swinger before it ever was mounted up to the bike....

[SHEEBANSAVAGE]

Thanks for the replys!!!

 

Later