blacknred03 Posted June 1, 2006 Report Posted June 1, 2006 I am in the process of splitting my cases for the first time and I have a few questions. What size is the big nut that holds the clutch basket in? You know the one you have to buy or make the tool in order to remove. Also I have been running with my TORS junk bypassed for a while but now that I am this far I want to get rid of it for good. Should I get a TORS eliminator or new carbs? I am running a stock stroke with a FAST port job, I know that stock carbs are fine but in order to get rid of the TORS it might be worth it. Or what about a single carb setup? Quote
bansheeseat$$ Posted June 1, 2006 Report Posted June 1, 2006 (edited) The big clutch nut is 32mm.As for the T.O.R.S removal if your wanting to go to bigger carbs sooner then later get diffrent carbs if not get the eliminator kit.And for the single carb I like them but alot of peaple don't. Edited June 1, 2006 by bansheeseat$$ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.