BansheeDragRacer Posted May 26, 2006 Report Posted May 26, 2006 (edited) I have a 4mil stroker with 115mm long rods it is a wiesco crank, true and welded with hot rods perfect shape mabey15- 20hrs of easy time on it 450 plus shipipng Fully Drag Ported cylinders with boost ports come with 60 over wiesco pistons in perfect shape ready to bolt on to your bike 350 plus shipping both side cascade cover stator side is 3 piece and the clutch side has the water pump cover and the insert in the middle 300 plus shipping for both sides Keihin 35.5 pj's with power jets set up for alky no throttle cable 250 plus shipping full motor pushes at about 90 hp and is in perfect running shape just needs to be bolted on to a frame it has alot more done to it and if you know something you are looking for that i dont have listed that you think i might have just pm me or you can give me a call at 606-344-0257 and well try to make a deal!! may do some trading on parts or whole motor!! Edited May 26, 2006 by BansheeDragRacer Quote
BansheeDragRacer Posted May 26, 2006 Author Report Posted May 26, 2006 well man were i live we have this guy that has been racing for like 35 yrs and he builds some bad bikes and snowmobile motors he builds about everything and he does just about everybodys porting around here i can get some pics of the port work if anyone is seriously interested Quote
Blaster x Posted May 26, 2006 Report Posted May 26, 2006 would you part all the bolts for it..like, head nuts,cylinder nuts and case bolts Quote
woodro77 Posted May 27, 2006 Report Posted May 27, 2006 would you part all the bolts for it..like, head nuts,cylinder nuts and case bolts 521185[/snapback] Quote
cdwood37 Posted May 27, 2006 Report Posted May 27, 2006 do you have some pics of the side covers? Quote
BansheeDragRacer Posted May 27, 2006 Author Report Posted May 27, 2006 yeah i can get them just pm me your address Quote
Dcuzz23 Posted May 27, 2006 Report Posted May 27, 2006 STILL GOT THOSED CASE COVERS? IF SO PM A PIC OR EMAIL TO [email protected]. THANX Quote
Duner440 Posted May 27, 2006 Report Posted May 27, 2006 Interested in those side covers. PM me. Quote
f4istunna Posted May 27, 2006 Report Posted May 27, 2006 interested in the complete motor what will you take for it? where is it located? Quote
Fireroad Express Posted June 3, 2006 Report Posted June 3, 2006 will give you 350 for the crank. Quote
michigan_soler Posted June 3, 2006 Report Posted June 3, 2006 im not into the Shee's yet so don't wanna low ball, but how much for full engine and how much for the tranny internals and that shift fork plug that i have been lookin for... raleylund (aim) [email protected] so let me know ASAP, please Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.