i suck at jetting

[Motoman991]

i need some help on what or around what the jetting should be on my banshee. it has old school fmf pipes and silencers, K&N in the box with no snorkel, ported reed cages with boyseen reeds and the vitos 404 kit, my elevation is around 900ft and the temp is around 75

[[email protected]]

so the motor has stock porting and stock carbs ?

[FasterThanU90]

go with what u got listen to ur bike and how it performs or maybe sum1 will chime in and cheat for u

[[email protected]]

go with what u got listen to ur bike and how it performs or maybe sum1 will chime in and cheat for u

517005[/snapback]

 

 

funny but its true how people chime in

[Motoman991]

yea it has stock porting and carbs, right now it has 290 main, 27.5 pilots and the needle is moved up one clip

[[email protected]]

preety sure the pilots right on , however mess around with the needle or call vitoz , they have " special " needles i belive for there 404 kit ..... i got there kit but stroked it with a 10....... kehin 35 168 , mid clip , 55pilot..... Vitoz will give u a baseline and then you can compare to what other people tell you... But only you will be able to judge if your runnin lean or rich , so take your time !

Edited May 17, 2006 by [email protected]

[dajogejr]

I too strongly suggest a Toomey (dynojet) needle or Vitos.

 

Stock needles have a lean spot in the midrange...