Carbeuration

[bansheezer]

I just wanted to make a post to tell you guys how much hell 2 carbeurators has put me through since i got my shee. When i bought it the bike would start but idle high and it wouldn't adjust, i took them apart several times and made posts asking questions which was always a great help, but anyway after at least 5 times i found that i was missing my choke tube, the slides were in backwards, the needles were set wrong, the float levels were way off, and finally after all that it wouldn't start for shit. After that i got my new exhaust and it came with a good set of directions for the new jetting and as i was looking through that i noticed it said if your float bowls were mixed up the choke wouldn't work because one carb has a cross drilled hole in the bottom of the float bowl to allow gas in for the choke, i check that out and neither bowl had one, turns out i had to get the right bowl for it and now it starts right up runs like a dream. I just thought this would be some valuable info for people that are havin these problems. Sorry for the long post.