szewczyd Posted April 6, 2006 Report Share Posted April 6, 2006 First is a 2005 Yamaha YFZ450, thing is near new with very very low hours on it. Ready to rip anywhere track or trail. I only trail rode it. -Has Full HMF sport series exhuast -AC nerfs -Teather -Black Laker Custom Plastics -Intake mod -Aftermarket jet kit and is right on Second we have a 1995 Yamaha Banshee that is unbelievable bada$$. Don't let the year fool you. Since 1987 nothing has really changed other than the j-arms and this has a-arms so no worries at all. Also this thing has been kept in great shape, its not your average pounded to the ground banshee. Starts on one to two kicks guaranteed! Very strong with many mods. -Fresh motor with low hours -Thunder Pipes, -Trinity CV-2 with 33mm PWK, -Pro-Flow With K&N, -2 Swingarm, +4 Durablue axle, -YFZ Shocks DeRisi Racing Modified Dual Rate Springs and Zero Pre Load, +2 QuickSand MotorSports A-Arms, -Stock Rear DeRisi Racing Modified Dual Rate Spring and Zero Pre Load -AC Propeg nerfs -Have brand new set of itp's for the rear saving till these were gone. -Pro Taper Handle Bars and more... Third we have a 2001 Yamaha R6 with only just over 9k on it. Very well kept and maintained. Never crashed. Brand new tires with literally like 100 miles on them. GREAT GAS MILEAGE!!! Has a few minor scratches. -Yoshimura tri-oval exhaust sounds great and not annoyingly loud -Jetted and just tuned up in fall when the new tires were put on. pic does not show exhuast as it was just put on in fall. And finally we have a 2003 Margay 1.25 Limo race Kart. I have everything needed to get into racing...literally everything. Kart will be a blast for anyone. Comes with freshly blueprinted TCT KT100 with can muffler. many extra parts and extras! I have suit and helmet like I said everything needed! So theres the deal guys, I am looking for a nice dsm 1g or 2g must be 5 spd and must be AWD. Also will possibly do some combos if need be. Hit me up here with a pm or szewczyd@yahoo.com with an email. Quote Link to comment Share on other sites More sharing options...
endofitall9 Posted April 6, 2006 Report Share Posted April 6, 2006 I just sold a dsm awd 2nd generation. I don't know about where you live but here in wv you can pick them up cheap i sold mine for $2500 had rims cat, headers.ect. alot of work good luck tho Quote Link to comment Share on other sites More sharing options...
WALLACE84 Posted April 6, 2006 Report Share Posted April 6, 2006 Damn I think I would give my both nuts for 450 and shee! nice bikes man, wish I could buy them Quote Link to comment Share on other sites More sharing options...
szewczyd Posted April 6, 2006 Author Report Share Posted April 6, 2006 Thanks guys ya I really need to get my hands on a decent car. I sold my last talon for 10k it was built and then started buying a lot of toys and this is were I am as of now. Quote Link to comment Share on other sites More sharing options...
NotsafeFWD Posted April 7, 2006 Report Share Posted April 7, 2006 I have a pretty tasty 1g car up for sale, however it is FWD. The car has made over 394 whp with the older smaller 50 trim, which now it has a 60 trim sitting in its place. The car has over 14,000 dollars put into it, but I'm asking only 7,000 for it. If your interested I might take in something of yours for a trade. Let me know, I'll throw up some pics. Quote Link to comment Share on other sites More sharing options...
CRASHTH Posted April 7, 2006 Report Share Posted April 7, 2006 HOW MUCH DO YOU WANT FOR THE 450 Quote Link to comment Share on other sites More sharing options...
szewczyd Posted April 7, 2006 Author Report Share Posted April 7, 2006 Looking for 5k for the yfz450 Quote Link to comment Share on other sites More sharing options...
DSSA Posted April 7, 2006 Report Share Posted April 7, 2006 Damn. A lot of DSM guys on here--good to see it. I don't have any DSMs available at the moment (unless you want to drop $25K on my GVR4 that is almost done ;-) ). Looking for any parts? Got a crapload around (HKS Manifold, T-72, T-61s, etc., etc., etc.). Josh JNZ Tuning,Inc./JM Fabrications Quote Link to comment Share on other sites More sharing options...
szewczyd Posted April 7, 2006 Author Report Share Posted April 7, 2006 Don't need anything at the moment but when I get my hands on a dsm again I am planning on it being more badass than my last one. Which had a completely built motor with all the added goodies but I only had a FP20g next car is going to be bigger for sure. Lets see this Vr4 Quote Link to comment Share on other sites More sharing options...
szewczyd Posted April 8, 2006 Author Report Share Posted April 8, 2006 No body? Quote Link to comment Share on other sites More sharing options...
bokeasmowl Posted April 8, 2006 Report Share Posted April 8, 2006 sweet banshee, my right arm and how much flow do you want for it !! what would you take in trade thanks, CHRIS Quote Link to comment Share on other sites More sharing options...
njbanshee Posted April 8, 2006 Report Share Posted April 8, 2006 i have a real sick banshee i'm looking to trade for a 450. PM me if you are interested Quote Link to comment Share on other sites More sharing options...
2bzy2p Posted April 9, 2006 Report Share Posted April 9, 2006 to bad that wasnt a liter bike! free bump Quote Link to comment Share on other sites More sharing options...
szewczyd Posted April 10, 2006 Author Report Share Posted April 10, 2006 sweet banshee, my right arm and how much flow do you want for it !! what would you take in trade thanks, CHRIS 499200[/snapback] What you got for trade? Quote Link to comment Share on other sites More sharing options...
szewczyd Posted April 12, 2006 Author Report Share Posted April 12, 2006 up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.