chains

[tmac20031]

I guess this might be a dumb question but at this point i dont care. Ive looked at it all over and the only thing I can find is a pin and a number underneith(520) but from there Im stuck. How do I take this freakin chain off ? A little help

[banshee332]

I guess this might be a dumb question but at this point i dont care. Ive looked at it all over and the only thing I can find is a pin and a number underneith(520) but from there Im stuck. How do I take this freakin chain off ? A little help

495385[/snapback]

there should be a master clip there that you can take off.

[tmac20031]

there should be a master clip there that you can take off.

495389[/snapback]

Ive taken it off but what do I do after that?

[Wicked98Shee]

sometimes the sideplate will stick on the o-ring chains, take a small flat tip screwdriver and gently pry it apart. lol ya might have to get a little rough with it if it's really stuck.

[tmac20031]

sometimes the sideplate will stick on the o-ring chains, take a small flat tip screwdriver and gently pry it apart.  lol ya might have to get a little rough with it if it's really stuck.

495391[/snapback]

Are you talking about the plate with the number on it?

[Wicked98Shee]

ya the sideplate that was under the clip ya removed. most of the time they come right off, but they can be a bastid sumtimes.

[dennybyz]

if the chain is junk ...take a set of oxy/acetylene torchs and destroy it .....if chain is good be careful at taking it apart ....cutting is fastest way

[MILO]

if you're having that much trouble getting it apart, wait till you try to get it back together. those little x or o rings can be a pain to get compressed to get the plate and clip back on. tusk's little chain press works great, otherwise i used a mini c-clamp to compress it. but after having the chain press, it's definitely the way to go.