JUGGS Posted March 28, 2006 Report Posted March 28, 2006 I am replacing my axle bearing in the stock axle carrier. I got the axle nuts off and the sprocket and all the other stuff i need off but i can't get the sprocket hub off the axle. I can see it is on a spline but it will not budge i have soaked it in penitrating oil for 6 hours and beat the hell out of it and no go. Is there something i'm missing or is there a trick to it. Thanks Quote
ironhead Posted March 28, 2006 Report Posted March 28, 2006 ive never had that problem but as a last resort u could try to heat the sprocket hub if u have a torch ,or rig up some type of puller (maybe 2 ratchet straps ,one for each side of the srocket going to the end of the axle ) but try not to bend it .if u do they are 75 $ , the heat might afect it too so be carfull .or just pay for a new one and heat the hell out of it .good luck Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.