racer Posted March 24, 2006 Report Posted March 24, 2006 (edited) anyone know the wet or dry weight of a fully assembled banshee motor? just out of curiosity, i know the fucker is heavy cause i get it in and out of the chassis myself, but never have a scale at the right time. Edited March 24, 2006 by gimmeabeer Quote
racer Posted March 24, 2006 Author Report Posted March 24, 2006 no way, you think its that heavy? Quote
Dmcbanshee Posted March 24, 2006 Report Posted March 24, 2006 Like wallrat said approximately 80lbs Quote
daryn c Posted March 24, 2006 Report Posted March 24, 2006 well i was very tired when i was pulling mine out i guess its more like 80 Quote
Cotton eyed Joe Posted March 25, 2006 Report Posted March 25, 2006 76.462 lbs. If you take the dip stick out, it will drop it to 76.459 lbs. Quote
racer Posted March 25, 2006 Author Report Posted March 25, 2006 Thank you Stan, Matt, and everyone else who replied. Quote
lonestar Posted March 25, 2006 Report Posted March 25, 2006 3/8 plywood crate 535 10/mm about 102 pounds Quote
racer Posted March 25, 2006 Author Report Posted March 25, 2006 3/8 plywood crate 535 10/mm about 102 pounds 492173[/snapback] wishful thinking. Quote
aczar Posted March 25, 2006 Report Posted March 25, 2006 Well I just shipped mine to Jim at Passion Racing and minus the jugs,headn,pistons and carbs it was 81.7 lbs including the box so maybe just the engine was about 70. Quote
80overShee Posted March 26, 2006 Report Posted March 26, 2006 I thought I read in my manual that it was 81 pounds. Maybe that was with the carbs and oil...dunno. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.