No Limit Powersports Posted March 8, 2006 Report Posted March 8, 2006 I know ive heard of people coating there aarms before but my bro just go it done and it melted the teflon or whatever it is around the ball joints and now there shot. Quote
kb7kuh Posted March 8, 2006 Report Posted March 8, 2006 I have heard that they can be Flash cured (a little heat at a time) but I'm not sure how well it holds up. I just sandblasted mine (stock a-arms) and primed & painted them. Quote
MYquadsFaster Posted March 8, 2006 Report Posted March 8, 2006 mine are powdercoated... did you clean out the greese in the ball joint? i was worried about it and cleaned it as much as i could and taped off the area with high temp heat tape...they came out stuck in place but i knocked them lose and re-greased and there brand new....that sucks there scrap but now you got a reason to buy aftermarket ones... Quote
Dead Op Posted March 8, 2006 Report Posted March 8, 2006 Yeha man you gotta remove ALL the grease...Sucks you got polished turd now. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.