adamwan Posted February 27, 2006 Report Posted February 27, 2006 My Banshee was stolen and recovered. It has not been used for 4 months and has been stored in a friends garage. When I came to use it, it would not start. I found there was no spark so thought that as it was hot wired when stolen the wires had came lose. Yet when I looked for the wires they were not there and there was an empty socket. I do not know too much about quads themselves just know how to ride them. Any ideas as to if the lost wire is the problem and if so what parts i need Thanks. Quote
suzuki0702 Posted February 28, 2006 Report Posted February 28, 2006 My Banshee was stolen and recovered. It has not been used for 4 months and has been stored in a friends garage. When I came to use it, it would not start. I found there was no spark so thought that as it was hot wired when stolen the wires had came lose. Yet when I looked for the wires they were not there and there was an empty socket. I do not know too much about quads themselves just know how to ride them. Any ideas as to if the lost wire is the problem and if so what parts i need Thanks. 479679[/snapback] tors ...unplug the wires going to the carbs, the throttle and there is also a black box under the left side of the gas tank...unplug all that then check to see if u have spark...if not check the wiring diagram....later Quote
Bansheeduner02 Posted February 28, 2006 Report Posted February 28, 2006 they probably unplugged the key or something to do with the tors so just get a manual and find out with wiring you are missing by looking at the wiring diagram. Quote
Wallrat Posted February 28, 2006 Report Posted February 28, 2006 Buy a clymers and look at the wiring diagram. Telling us you have an empty socket doesn't give us alot to work with. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.