Polish Posted January 26, 2006 Report Posted January 26, 2006 (edited) I am Hooking up a kill switch off a motocross bike to my bars........I have that part figured out. I also have the lights figured out too! ( Which I am running a toggle switch......ON / OFF)........ here are the color codes of the wires Green/yellow = lights .......(high / low beam) I am going to use the yellow and cap off the green black = ground black / white stripe = on / off switch blue = tail light yellow / red stripe = ?????????<----------- is this a power wire? and can it be connected / spliced w/ the blue (tail light) and the green (Lights) wire? Its all seams self explanitory.........I just dont want to over power one thing / or burn any thing up. Help with the yellow / red stripe wire Edited January 26, 2006 by Polish Quote
fastbanshee8 Posted January 26, 2006 Report Posted January 26, 2006 The yellow/red, is the power wire coming from the voltage regulator to both the high and low beams of the head lights. Quote
sheenut05mx Posted January 26, 2006 Report Posted January 26, 2006 I have a wiring diagram that is can fax to you. Write back and I can e-mail you. Quote
Polish Posted January 26, 2006 Author Report Posted January 26, 2006 my email is [email protected] thanks a bunch Quote
Ls7colorado Posted January 27, 2006 Report Posted January 27, 2006 Maybe will this might help? http://www.dfn.com/benkaren/elecfaq.html Quote
Polish Posted January 28, 2006 Author Report Posted January 28, 2006 Maybe will this might help?http://www.dfn.com/benkaren/elecfaq.html 465132[/snapback] that worked awesome........thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.