smkmupbanshee Posted January 21, 2006 Report Posted January 21, 2006 (edited) Can anyone tell me if these are only correctly? Everytime I go to tighten the spindle the upper arm is hitting the shock and putting pressure against it. I've been told I have them on correctly but I dont think they are unless I have a different problem. They do this on both sides. Edited January 21, 2006 by smkmupbanshee Quote
Lepew Posted January 21, 2006 Report Posted January 21, 2006 looks like your uppers are on the wrong side or upside down. the top ball joint should be above the lower one. I would guess the large bend in the upper arm goes to the back to allow clearence for the shock. Quote
rebelbanshee2 Posted January 21, 2006 Report Posted January 21, 2006 Yep uppers are on the wrong side. They are rigt side up though Quote
smkmupbanshee Posted January 21, 2006 Author Report Posted January 21, 2006 Thanks guy's I switched them around and they fit perfectly now. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.