engine help

[cexualcensations]

I am building a mx banshee engine and had a question. Right now I have stock cylinders i just had mx porting by trinity racing and have the trinity cylinder head. The cylinders are 64.25mm. I am wondering if i was to get the wiseco hotrod +4mm stroker longrod crank along with the spacer plate and wiseco 795 stroker pistons could i still use the same trintiy head domes are would i have to get a modified dome. I was thinking that if i used the stroker long-rod plate the domes should be fine. I called trinity racing and they said that i would have to send them my cylinders and pistons, crank and cylinder head so they could modify some domes. I need to get second opions because trinity racing is so damn slow when it comes to modifying something. it took me like 3 months to get my 485 cheetah cylinder and drag pipes for my other banshee.

[demonic shee]

you'll be fine because the series 795 pistons have a piston pin height that is 5mm closer to the crown which will yeild the longer rod, the spacer plate yeilds the additional stroke.