zzzz Posted December 11, 2005 Report Posted December 11, 2005 After my bike sits for awhile ( a few weeks ), when I pull the clutch lever in, the lever will stick. So to release it I have to tap on the part that is on top of the case ( it is the part that you line up the arrows on to adjust your clutch ). I have to do that a couple times before the clutch will release properly. After that it works just like it should. Are the clutch springs bad or is it something else? The clutch is only a couple years old. Thanks. Quote
FIRST BANSHEE Posted December 11, 2005 Report Posted December 11, 2005 disconnect the cable at the case and see if that arm moves freely back and forth, if it does your cable is sticking, if not it's somewhere between the arm and clutch springs.goodluck Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.