fabricated Posted November 29, 2005 Report Posted November 29, 2005 I shaved .035 off my head and did a really good dune port on my banshee. I also installed a 4 degree timing key and a set of 1/2'' reed spacers. I have toomey t5 with 30 pilots, 340 mains, and the clip on the 4th groove on dynojet needles. I wanted to know how much compression I am probably running at glamis. Quote
bigboybanshee Posted November 29, 2005 Report Posted November 29, 2005 There is only 1 way to know...buy a compression tester. I'm not being an ass either, I'm being truthful. Quote
ellison445 Posted November 29, 2005 Report Posted November 29, 2005 I agree!!! There is only 1 way to know...buy a compression tester. I'm not being an ass either, I'm being truthful. 442838[/snapback] Quote
Gargamel Posted November 29, 2005 Report Posted November 29, 2005 yea, it is a small investment in a tool that you will get good use of. Just get one and you'll be a couple kicks away from always knowing Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.