fabricated Posted November 15, 2005 Report Share Posted November 15, 2005 I have a 2005 banshee will a mild flow port and .035 off the head. I have a +4 degree timing key and a set of 1/2 inch reed spacers. I wanted to know what jetting is recommended from the pilots, needle clip location, to the mains. I am ruuning toomey t5s with toomey needles and an open k&n filter. Thanks for the help. This bike will be jetted for glamis Quote Link to comment Share on other sites More sharing options...
2003LimitedBanshee Posted November 15, 2005 Report Share Posted November 15, 2005 I would presume you will be in the 350-360 range for the mains, 27.5 (maybe 30 at the largest) on the pilot, and clip on the 3rd space for a stock needle, probably 4th if your running the Dynojet needle that comes in the Toomey kit. But, I don't ride Glamis, so I'm not super familiar with exact elev below sea level and air temp. Also, just my .02, but ditch the timing key at your first opportunity and throw in a Ricky Stator timing plate, only $35+shipping. Quote Link to comment Share on other sites More sharing options...
1.6i Posted November 15, 2005 Report Share Posted November 15, 2005 start @ 350 mains one needle clip down and plug chop awaaaaaaaay Quote Link to comment Share on other sites More sharing options...
sheecandy Posted November 15, 2005 Report Share Posted November 15, 2005 my old dune ported motor with pro circuits and my 04 with dune ported and sst both ran great with 32.5 piolet 4th clip on needle and 350 mains at glamis Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.