heres a good one?

[BANJO]

my kick start gear when i kick it will luck some how..

it kicks fine then locks like the cranks jamed.. but its not the cranks i can spin the flywheel.. now if i turn the fly wheel it unlocks the kick start till i kick it again..

the gear comes out then jams up?? i say mabe behind the other gears or somthing.. i was driving and the gear moved and locked my hole bike up..

like it stalled.. but i was in 4th doing a good speed.. i replaced my cluch basket/gear.. and put my bike back to geather after messing with the kick gear again... and kicked it 4 times and she locked up.. my motor is being a dick right now... i cant seem to figure bout why the kick start is locking like that.. my mechcanic cant figure it out nither... well.. help me out if you can..

sorry for the long message.. im rushing here...

peace devin

Edited October 21, 2005 by BANJO

[J-Madd]

Is the spring installed correctly? A Clymers manual could help.

[BigRed350x]

I agree, grab yourself a clymer and memorize that biach

[BANJO]

its not the spring... the kick gear is in the right way...

i was kicking find but then after a few it messed up again.. the first time it messed up i was driving the danm thing...

anyways.. must be bent or the springs bad or somthing... ill hopfully get it fixed this weekend..

thanks devin

[endofitall9]

ok...in the motor there is a gear that the kick started engages so it can crank the clutch basket but on this gear there is a snap ring and washer. i have had instances where this sanp ring has come off thus letting that gear get suck rattle and just plain freak shit up worth a try good luck