BigRed350x Posted October 10, 2005 Report Posted October 10, 2005 (edited) OK so I just picked up another Banshee. Rode for literally 1 minute then had to pack it up and move ot my new house. I went out today after unpacking to start it up. Wouldn't start. Checked compression... 70psi on both sides. LOL Time for the winter rebuild. The bike is totally stock except chrome aftermarket a-arms and some chrome T-5's & Nerfs. Still have (gag) TORS. I start my new job tomarrow. My second paycheck is going to go only to the banshee. $2500 worth of googides. Here's my list so far... TORS Removal Kit Cool Head w/ 17cc domes (ride at 6-8k feet so I won't need race gas) V-Force 2 POD Filters Gorr Woods Port New Clutch Billet Impeller New Bars & levers Timing Plate New Top End New Chain & sprockets Some Billet stuff & Front Bumper It already has a nice front suspension, minus shocks. Just needs some engine work done. I want to get the frame PC'd and some fullbores later. Probably next winter for that part. I also have some nice ITP C-Series rims that are going to look sick on this thing. I will probably get some bigger carbs later. What do you all want to see on it besides the stuff listed above? Edited October 10, 2005 by BigRed350x Quote
hittintrees srh Posted October 10, 2005 Report Posted October 10, 2005 Looks like a good x-mas lidt to me! Just dont get cheep on us by reusing the old pistons when you do your rebuild. Do it right and get some weisco pro-lights. YOUR BIKE IS GUNNA RIPP Quote
BigRed350x Posted October 10, 2005 Author Report Posted October 10, 2005 Looks like a good x-mas lidt to me! Just dont get cheep on us by reusing the old pistons when you do your rebuild. Do it right and get some weisco pro-lights. YOUR BIKE IS GUNNA RIPP 424539[/snapback] LOL I'd like to smack anyone who re-uses pistons on a complete rebuild. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.