Need help buying jets for a starting ponit

[Killdmycobra]

My Rocket pipes should be here next week and i need to order jets. My mod list is:

 

Bone stock 2005 banshee

Rocket pipes

Boyesen rad valves

NOSS head with 19cc domes (will be using 110 leaded sunoco at 40:1 with 927)

Trinity K&N intake

Rick stator timing plate +4 timing

 

 

I need some help buying jets so i can get a base for tuning. I live at Sea Level in south Florida.

 

Jeff

[GYTWYPT]

My Rocket pipes should be here next week and i need to order jets.  My mod list is:

 

Bone stock 2005 banshee

Rocket pipes

Boyesen rad valves

NOSS head with 19cc domes (will be using 110 leaded sunoco at 40:1 with 927)

Trinity K&N intake

Rick stator timing plate +4 timing

I need some help buying jets so i can get a base for tuning.  I live at Sea Level in south Florida.

 

Jeff

391172[/snapback]

Not sure what the diffrence in altitude is but i live in Missouri and a piped banshee with airfilter and stock carbs here is in the 290-320 range most of the time it is 300 and up.

[race-a-holic]

I think 300 would be a good starting point.Make sure to check the plug to see if it's lean after rejetting it.

[superchicken]

with the lid off i would try a 320 main,with the needle in the middle

[Banshee~]

I would say 320-360 mains, 27.5 pilot, stock clip. By the way, ditch the lid to get the most out of the rockets.

[Killdmycobra]

I would say 320-360 mains, 27.5 pilot, stock clip. By the way, ditch the lid to get the most out of the rockets.

391788[/snapback]

yeah, i forgot to add that i will not be running the lid