BigCP Posted May 27, 2005 Report Posted May 27, 2005 i changed the clutch perch on my banshee and took that bulky stocker off and i replaced the rear parking brake deal with one of those block off plates so now i just have a nice ez pull lever and perch. there was a plug in deal on the perch and of course i unplugged it and left it hangin with the intentions of taking it completely off later. what i need to know is what to do now because my bike won't run without that little button on the plug in depressed, with it just hangin there and button extended my bike won't open up at all. any information on how to fix this permanently so i won't have any more problems. thanks cp Quote
Bc34c Posted May 27, 2005 Report Posted May 27, 2005 i dont know about your problem myself but i read a post in here earlier today that said the "plug in deal" has 3 wires on it? if so you have to connect 2 and leave the 3rd and tape it up. sorry i dont remember the colors or if it actually works but worth a try i'd say. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.