westerngoods Posted May 26, 2005 Report Share Posted May 26, 2005 I am going to buy a stock banshee soon, when i do, what are some of the first mods i should get? and how much will they cost Quote Link to comment Share on other sites More sharing options...
jjfizzle51 Posted May 26, 2005 Report Share Posted May 26, 2005 get some good pipes and clamp on carbs its worth every penny. depending on what pipes you get your looking $450-$650 but the only pipe ive seen at 650 was trinitys IV pipes. and i think its just cause there stainless steal i would go for toomey t-5s and k&n clamp ons Quote Link to comment Share on other sites More sharing options...
jjfizzle51 Posted May 26, 2005 Report Share Posted May 26, 2005 by the way welcome to the hq Quote Link to comment Share on other sites More sharing options...
Otis Posted May 26, 2005 Report Share Posted May 26, 2005 If it were me, and i were to do it all over again......I would have started with the suspension, and related components... Shocks, A-arms, and maybe the swinger and axle... No sence in making it faster if you can't put it to the ground.... Prices will very ..greatly have fun with it! Quote Link to comment Share on other sites More sharing options...
westerngoods Posted May 26, 2005 Author Report Share Posted May 26, 2005 by the way welcome to the hq 374075[/snapback] thanks Quote Link to comment Share on other sites More sharing options...
westerngoods Posted May 26, 2005 Author Report Share Posted May 26, 2005 what are some good sites to look at for these parts? Quote Link to comment Share on other sites More sharing options...
C&B Posted May 26, 2005 Report Share Posted May 26, 2005 what are some good sites to look at for these parts? 374084[/snapback] If its bone stock, the very first thing to do is junk the stock air filter sys. Its a piece. Then think pipes let her breath that new air out freely and show ya whats up. Another peice of equip I found to wear really fast was the stock chain slider. They have real great new ones that you put on without taking the swinger off. I also scrapped the tors asap! Quote Link to comment Share on other sites More sharing options...
westerngoods Posted May 27, 2005 Author Report Share Posted May 27, 2005 If its bone stock, the very first thing to do is junk the stock air filter sys. Its a piece. Then think pipes let her breath that new air out freely and show ya whats up. Another peice of equip I found to wear really fast was the stock chain slider. They have real great new ones that you put on without taking the swinger off. I also scrapped the tors asap! 374296[/snapback] thanks you guys are alot of help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.