williamjernigan Posted May 20, 2005 Report Posted May 20, 2005 I just installed my shift star and I put the clutch basket and everything on. Now i have no clutch pressure. I think that I need to go back and adjust the clutch rod screw? Do i turn it in or out to get more clutch pressure. Quote
Rare Scottish Tree Badger Posted May 20, 2005 Report Posted May 20, 2005 Whichever way makes the two arrows line up together (Clutch arm and Casing) when you apply pressure with your finger to the clutch arm. Rare. Quote
PassionRE Posted May 20, 2005 Report Posted May 20, 2005 Whichever way makes the two arrows line up together (Clutch arm and Casing) when you apply pressure with your finger to the clutch arm. Rare. 371805[/snapback] Either the clutch ball bearing fell out, or the clutch outer pressure plate is not engaged properly to the inner hub....it wont mesh in just any position.....Jim Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.