demon340 Posted May 18, 2005 Report Share Posted May 18, 2005 the aftermarket ball joints i have dont fit into my spindles, there too big. does anyone know where i could get a cheap set from? there the kind that goes into the a arms and a nut is on the back to hold them on. cant i go to a auto zone or pepboys store and get a set? doea anyone know what car they are from to fit banshees? i heard the older escort ones fit but not sure. Quote Link to comment Share on other sites More sharing options...
05bansh Posted May 18, 2005 Report Share Posted May 18, 2005 Check Rocky Mountain Quote Link to comment Share on other sites More sharing options...
demon340 Posted May 18, 2005 Author Report Share Posted May 18, 2005 i just checked there. they only have tie rod ends. i need the ball joints for my a arms. i dont think they are the same thing cause my tie rods are alot smaller size ball joints than my a arm ones? i thought you could buy automotive ball joints, but what model car are they from????? Quote Link to comment Share on other sites More sharing options...
eehsnab2 Posted May 18, 2005 Report Share Posted May 18, 2005 Check Rocky Mountain 370804[/snapback] Believe it or not some welding and Iron supply stores carry them. Its a long shot but I know my local Iron supply shop has them in stock. Quote Link to comment Share on other sites More sharing options...
demon340 Posted May 18, 2005 Author Report Share Posted May 18, 2005 Believe it or not some welding and Iron supply stores carry them. Its a long shot but I know my local Iron supply shop has them in stock. 370967[/snapback] really....... well im going now to some automotive stores to see what they say. i'll let you guys know if i get em or not. Quote Link to comment Share on other sites More sharing options...
Lepew Posted May 19, 2005 Report Share Posted May 19, 2005 really....... well im going now to some automotive stores to see what they say. i'll let you guys know if i get em or not. 370988[/snapback] Check ebay and some of the aftermarket a-arm manufactures. I have seen what your looking for but don't know where. They were $80 for a full set of four. You can always ream your spindles the taper is probably Honda. Quote Link to comment Share on other sites More sharing options...
demon340 Posted May 20, 2005 Author Report Share Posted May 20, 2005 yeah no dice still on the joints so im gonna go ream them out with a step drill bit or whatever there called. hope this works........... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.