Will LSR hub fit Dura blue?

[23champ]

I bought a LSR sprocket hub,and want to know if it will fit on a dura blue eliminator X-33 axle. Anyone know?

[locogato11283]

hmm i know itll fit on a stock axle. i would just call LSR and ask them...i would be willing to bet itll fit.

[23champ]

hmm i know itll fit on a stock axle. i would just call LSR and ask them...i would be willing to bet itll fit.

370549[/snapback]

 

I called lonestar, they said they don't know shit about dura blue. So I called dura blue, the guy I talked to was pretty cool until I asked him about the LSR fittting on a Dura Blue. Then he turned into a complete dick and said no way it will never work. I tried to ask him if a stock sprocket hub would fit ( since LSR will fit stock axle), but he just kept talking over me, and cutting me off, and then hung up! Meanwhile I just sittin here on the phone thinking... "what the fuck?"

 

So I called magic racing, and asked the same question, the dude said "let me check" he comes back on and said " shouldn't be a problem, It should work just fine" so I thanked him and got off the phone.

 

Then decided I should get a second opinion. I called up NAC's they said "nope it won't work" and he hung up on me also. And again I'm sitting here with the phone in my hand thinkin "what the fuck is goin on, why is everyone a dick today?"

 

Finally, I call Rocky mountain, they said that it would work .

 

So who really knows if this bitch is gonna work or not?

[locogato11283]

thats about fuckin gay...hopefully someone here will know for sure..

[Meat_Head]

I run an LSR sprocket hub on my Durablue Eliminator Axle so you will be fine.

[chapmanmd]

The LSR Hubs will NOT fit on an X33 axle. Ive tried it because I had the wild idea to run Honda bolt pattern Banshee LSR hubs. Wont work. Sorry...

[rebelbanshee2]

Sprocket hub should... durablue can run a stock hub..LSR is same spec as stock. Wheel hubs are a different story since the X33 uses non stock system...Sprocket hubs should all be the same

[JARE77]

The sprocket hub will fit but the axle hubs wont because the x-33 is a pin drive unit. The lonestar axle hubs should fit on the other durable axles Because they are still stock spline pattern I believe.

[23champ]

The LSR Hubs will NOT fit on an X33 axle.  Ive tried it because I had the wild idea to run Honda bolt pattern Banshee LSR hubs. Wont work. Sorry...

370584[/snapback]

 

Chapman:

I noticed in your sig you have a Dura Blue X-33 with LSR hardware. What does the" hardware" consist of?

[2004LEBanshee]

My eliminator 2+2 takes all stock stuff but i dont thing the x-33 will.

[05bansh]

Sounds like there is only one way to find out.....

[chapmanmd]

Sprocket hub should... durablue can run a stock hub..LSR is same spec as stock.  Wheel hubs are a different story since the X33 uses non stock system...Sprocket hubs should all be the same

370595[/snapback]

 

You are correct. I am running LSR brake hub, LSR honda pattern sprocket hub, and LSR locknut. all work great on the x33. I did find out though later that you can get honda bolt pattern wheel hubs for the x33 banshee axle from durablue.

[chapmanmd]

Chapman:

I noticed in your sig you have a Dura Blue X-33 with LSR hardware. What does the" hardware" consist of?

370613[/snapback]

 

Brake hub, Honda pattern sprocket hub, taper bearing carrier. Locknut and hubs are durablue.

[chapmanmd]

You are correct. I am running LSR brake hub, LSR honda pattern sprocket hub, and LSR locknut. all work great on the x33. I did find out though later that you can get honda bolt pattern wheel hubs for the x33 banshee axle from durablue.

370814[/snapback]

 

 

I told you wrong. Locknut is Durablue. Its splined, not threaded.

[23champ]

Sounds like there is only one way to find out.....

370763[/snapback]

 

I think your right.. I've got the sprocket hub already. I got tired of wondering about the fit, so I ordered the axle today.. I should find out if its going to work or not in about a week.