Tranny problem

[Bansheeman1121]

I was ridin my shee on a long strip ran great got to 6th but then had to let off immeditly, so i down shfited and got to 3rd and noticed it wouldnt shift down anymore so i shifted up and it will go into 4th and thats it, i didnt hear any wierd noises and it runs awsome in 3rd and 4th but i wont shift dwon past 3rd or up past 4th any ideas?? BTW Theres 2 quarts of brand new belray 75w gear saver oil in it..

[scotts96fast]

I was ridin my shee on a long strip ran great got to 6th but then had to let off immeditly, so i down shfited and got to 3rd and noticed it wouldnt shift down anymore so i shifted up and it will go into 4th and thats it, i didnt hear any wierd noises and it runs awsome in 3rd and 4th but i wont shift dwon past 3rd or up past 4th any ideas?? BTW Theres 2 quarts of brand new belray 75w gear saver oil in it..

369280[/snapback]

 

 

I don't know what's wrong,but 2 quarts is to much oil.1.5 quarts is needed.

[wayfst]

check your shift dog and star. mine did the samething turn out to be the dog. ended up getting a new one.

[Banshee~]

You might try 80w gearsaver, thats what I use.....I read somewhere its not good to jump down more than a couple of gears all the time, but im not sure

[sam97]

check your shift dog and star. mine did the samething turn out to be the dog. ended up getting a new one.

369299[/snapback]

 

Bingo, had the same problem. My shift shaft claw was off of my star. Only allowed 3rd and 4th gears. I bought a new shaft assembly from the stealership, and bought a modded star from Boonman on here. THe whole thing can be fixed from under the clutch cover. Took me an evening of wrenching. Good luck, and hope that helps.