Removed E-Brake, now what

[Big Mike NY]

I'm sure this is what happens when you remove the e-brake, but how do you fix it?

 

I removed the e-brake, took the cable off the bike and installed the block off plate. Now how do I get the bike to run? It won't rev up the bike, like its being starved of fuel. The cable still left on the bike has the (what appears to be a sensor of some sort) with the male end that has to be pushed in.

 

How do I disconnect the sensor, or is there a another way to fix this problem.

 

Thanks in advance!

[broke]

I could be wrong, but just unplug it. It's been a long time since I did mine, but I am almost positive that's what I did. Track the wires down in the harness and pull.

[sredish]

Do a search for TORS

 

[Big Mike NY]

I could be wrong, but just unplug it.  It's been a long time since I did mine, but I am almost positive that's what I did.  Track the wires down in the harness and pull.

359285[/snapback]

 

 

I took the front plastics off and traced the wire to the connect and disconnected it. All fixed! Thanks broke!!!!