Banshee~ Posted March 27, 2005 Report Share Posted March 27, 2005 what if I dident hold the trottle all the way open after I killed it....Ive roded it and it feels fine (not cutting out or back fireing) I hacked into the plug and I see nothing just oil on the threads. How far do I have to cut? I went down 4 threads or so. I did bens " choke trick " and it was bogging bad in the bottem/mid and a little on the top. I know this isent the jetting fourm, just need reply quick. Quote Link to comment Share on other sites More sharing options...
kw04 Posted March 28, 2005 Report Share Posted March 28, 2005 when you cut the plug you cut it at the bottom of the threads so you can see the bottom of the porcilin part. Quote Link to comment Share on other sites More sharing options...
2stroker Posted March 31, 2005 Report Share Posted March 31, 2005 To get a real good look, chop off all the threads. I use a Dremel with a cut-off wheel and go all the way around the threads. This allows you to remove the threads giving you a clear view of the base of the porcelain. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.