Jump to content

Recommended Posts

Posted

By any chance would anyone have a downloadable service manual they can send me via email? I downloaded one but it wont let me print it out because i didn't buy it. Any help would be appreciated. I just put some fattys and powercore's on and trying to get the jetting and the carbs right. I am having some backfiring and my quad is at a buddy house so i need to print the pages that talk about carb synching and idle adjustment. Thanx guys.

Posted

I just have a Clymer's at home, nothing on the PC, but if nothing else you can print out the Jetting FAQ below...might not help much with sync & idle adjustment with the TORS system still in place but should help you get the jetting dialed in (BTW a backfire is usually a lean symptom). Good luck.

Posted
I just have a Clymer's at home, nothing on the PC, but if nothing else you can print out the Jetting FAQ below...might not help much with sync & idle adjustment with the TORS system still in place but should help you get the jetting dialed in (BTW a backfire is usually a lean symptom).  Good luck.

333315[/snapback]

 

Thanks for the info! What is different about doing it with the TORS in place?

Posted

With the TORS you'll set the idle speed AND the carb sync with the knobs on the TORS boxes atop each carb, with the TORS eliminated you'd use the cable adjusters on top of each carb to sync them and the idle screws to set the idle speed...

Posted

I think the backfiring is because it was 30 degrees f here in Anchorage when i started the Shee up. Im not gonna ride till the spring so i think i'll just check the jetting when it warms up a little. Im not riding till the springtime any way with all this snow on the ground.

  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...