V-Force w/ stock carbs?

[Animalman294]

I was going to put in a set of V-Force Delta 2's and read that you are wasting your time if you have stock carb's. I have Toomey T-5's and a K&N filter, and wanted to do the new reeds. Is it going to be a waste of money until I change the carbs? I am also planning on installing a Noss head in the near future with 20cc heads.

[rocketboy]

who ever told you that was full of shi* , v force rock on stock carbs as well as any carbs

[sredish]

You'll definitely get more flow. In reality, the flow right now is limited to your reeds and your ports. Open your reeds up, with the VForce, then you'll be good to go till your ready for porting.

 

It's not a waste to put VForce on stock carbs w/o porting, however a cheaper set of reeds like a ported stock cage and a set of boyesens will probably give you about as much flow, because of the stock porting. Should you decide you want portwork, then the VForce will outflow the stock ported cage and aftmkt reeds. So, what I'm saying is, with stock porting you have several options that will benefit you about the same, but you can go much farther with the VForce reeds. I wouldn't run anything but the VForce reeds, personally.

 

Scott

[jinx44]

V-force work great with stock carbs. I had stock cages ported by FTZ, then went to V-force and noticed a huge difference. Definetly get the V-force and be done with it. Also, a 2n1 filter setup from Toomey or Pro-flo does wonders.