Quick jetting, modified shee, help me out.

[lastlegwarrior]

Yeah i'm not gonna have much time before i go riding to mess with the jetting, so i was wondering about what size main should i be using? (i'm thinking 320's, maybe)

 

here's my mods:

 

wiseco .030 over pistons

hotrods crank

lightened flywheel

+4 timing/w timing plate

K&N clamp on's

Toomey T-5's

and a 15 tooth front sprocket

 

thanks for any replies.

[locogato11283]

320 at least. maybe even a 330 or 340. pilot at 27.5 is what we always ran with the exact same setup. where is boonville?? what part of missouri?

[lastlegwarrior]

320 at least. maybe even a 330 or 340. pilot at 27.5 is what we always ran with the exact same setup. where is boonville?? what part of missouri?

327374[/snapback]

 

thanks for the reply, boonville is a little spec right outside columbia,mo about 20mi. west of columbia. actually i needed this jetting info, because were going on a trip down to st. joseph, mo on the, 3rd,4th,5th, and 6th. but you probably don't know where that's at thanks for the jetting info.