01bansheefox Posted February 17, 2005 Report Posted February 17, 2005 Done alot to the motor and I think next i should move on to the carbs, is it worth the $$ also whats the upside of 1 into 2 carb setup? Ups/Downs? I do every single type of riding so just a basic example of 2 carbs vs 1 would be helpfull thanks. Also what size do you think i should get? Stock Stroke Ported Polish Milled Head Adv Timing V-Force and clamp on filters if any of these mods makes a difference. Quote
sredish Posted February 17, 2005 Report Posted February 17, 2005 Done alot to the motor and I think next i should move on to the carbs, is it worth the $$ also whats the upside of 1 into 2 carb setup? Ups/Downs?I do every single type of riding so just a basic example of 2 carbs vs 1 would be helpfull thanks. Also what size do you think i should get? Stock Stroke Ported Polish Milled Head Adv Timing V-Force and clamp on filters if any of these mods makes a difference. 325052[/snapback] For added low end and strong mid, great throttle response and good top, go for a 35mm single carb setup. For the ultimate in mid and top, go for a pair of 28's or 30's. Quote
ellison445 Posted February 17, 2005 Report Posted February 17, 2005 I agree, do you have a set of pipes yet? For added low end and strong mid, great throttle response and good top, go for a 35mm single carb setup. For the ultimate in mid and top, go for a pair of 28's or 30's. 325106[/snapback] Quote
locogato11283 Posted February 17, 2005 Report Posted February 17, 2005 i agree with the 35 for sinlge carb set up but if you want a lot on top you need bigger than the 30s. if you plan on doing some major mods i would say at least 33's if not 35's. 30s should get you tho if you dont think youll ever really get crazy with the motor. try to plan ahead itll save you alot of money. Quote
01bansheefox Posted February 17, 2005 Author Report Posted February 17, 2005 (edited) well no pipes yet because motor is still not put back in bike but Rockets are the only pipes im gonna buy. Right now im being offered some 32's for $225, is that a good deal? I dont plan to stroke it or anything until this motor is shot because I already got it ported and polished and you guys said if i put in a 4mm I would need to get it all redone to match it. Seems like a waist right there. Edited February 17, 2005 by 01bansheefox Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.