93blueoval Posted February 14, 2005 Report Posted February 14, 2005 ok, here is one for the banshee prodigies out there. i rebuilt my banshee's top end not too long ago, and had problems with the o rings in the head, so i ordered some more. my banshee sat for about three weeks with no spark plugs in it, but there was a towel covering the holes. no water got in, but when i put it back together today there was a small amount of rust in one of the jugs which came off with the wipe of a towel. But when i put it together with the new o rings it just wouldnt run right. it starts and idles fine, but when i put it in gear and tried to go it just bogged down and would barely run. i dont have the silencers on right now because i am waiting on exhaust clamps to get in, but i didnt think that would effect it that much. i have never messed with the jetting of the carb, but it ran fine before i rebuilt it so i would assume that it is ok. c'mon guys help please, i need to ride Quote
93blueoval Posted February 14, 2005 Author Report Posted February 14, 2005 oh yea, by the way i sprayed staring fluid all around the cylinders to see if it was sucking air, that isnt it Quote
93blueoval Posted February 14, 2005 Author Report Posted February 14, 2005 no, it has a 2 to 1 setup, with a 35mm PWK Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.