bansheexj Posted February 13, 2005 Report Share Posted February 13, 2005 I have a 2000 banshee with fmf sst pipes k&N with box but no lid. 70% of my riding is at sea level but i go into the mountains at times. what should my carb setup be PLEASE HELP. as much info as possible Quote Link to comment Share on other sites More sharing options...
bkabina Posted February 13, 2005 Report Share Posted February 13, 2005 Read this link. http://www.bansheehq.com/forums/index.php?showtopic=23546 Quote Link to comment Share on other sites More sharing options...
Banchetta Posted February 14, 2005 Report Share Posted February 14, 2005 I've jetted a few different shees w/ your setup and always end up at 290 mains, stock pilots, needle 4th clip from the blunt end. Adjust air screws to throttle response and make sure the carbs are in sync after...Do a plug test and let us know how it pulls. Quote Link to comment Share on other sites More sharing options...
richybanshee Posted February 14, 2005 Report Share Posted February 14, 2005 300 mains, air screws 1 1/2 turns from seated. If you go with the 280-290 mains probably you may need to set the jet needle to the 4rth notch. Do not go below 280 on the mains if airbox lid is off. Quote Link to comment Share on other sites More sharing options...
bansheexj Posted February 15, 2005 Author Report Share Posted February 15, 2005 thanks I'll try it out this weekend Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.