shortening the stock swingarm

[DMAN94]

i'm getting ready to have my swinarm re-welded (cracks) and i wanted to see about shortening it. i'm just not sure where to take from. i wanted to make sure that the shock mount stays in the correct place. has anyone done this and how did it work out.

 

thanks

dennis

[txblueshee]

I don't think anybody does it on the hq anymore but gary at quicksand does.

 

 

Mike

[DMAN94]

my buddy will be doing the work for me, i just wasn't sure where to take from for performance issues with the shock. i need to know where to cut, infront or back of the shock mount.

 

thanks

dennis

[txblueshee]

my buddy will be doing the work for me, i just wasn't sure where to take from for performance issues with the shock. i need to know where to cut, infront or back of the shock mount.

 

thanks

dennis

317974[/snapback]

 

 

Click right here ~~~~~~~~~> Clicky

 

That should tell you everything you need to know..... You better buy your buddy a case of beer and throw some chops on the grill. It'll take a solid 4 hours to git r done.

 

 

Mike

[DMAN94]

thanks allot for the info, this is perfect, and my buddy will be hooked up.

 

thanks again

dennis

[locogato11283]

Click right here  ~~~~~~~~~> Clicky

 

That  should  tell you everything you need to know..... You better buy your buddy a case of beer and throw some chops on the grill.  It'll take a solid 4 hours to git r done.

Mike

317995[/snapback]

a solid 4 hours? are you kidding me? to shorten a swingarm? haha what kinda retard you have do yours? i can shorten or extend a swingarm in less than an hour easily.