is 90 rwhp possible?

[1800bigk]

Is it ?

Edited February 13, 2005 by 1800bigk

[SDD]

You probably can't make that on gas with a stock stroke or big bore. It would take at least a 7mm stroker to do that on gas with stock cylinders. You might get close if you use alky and a little nitro mixed in or NO2. A cheetah cylinder will get into the 90's on gas.

[Southside Motorsports]

yes, you will get around 90-95 hp out of a 400 cheetah on gas with a full drag setup.

[Big Blue]

with a cheetah kit yes, stock cylinders on gas no, might me able to get into the 80hp range on gass with a 4mm.

[Southside Motorsports]

exactly...I know of guys that have made around 79-83 hp on gas with a 4mm stock cylinder motor.

[Big Blue]

If you are willing to wait here is a new setup that will be out shortly The new cheetah cub http://www.bansheeracing.com/ Read this thread as well http://www.planetsand.com/ubbthreads/showf...o=&fpart=1&vc=1

[Forcefed]

 

It IS absolutely possible and has allready been done....many moons ago......

 

89 RWHP and 49.6 ft/lbs Torque

 

350 - Stock cylinders - on Gas - 54mm crank - 4.1`s in 300ft with 180lb rider - stock chassis.

Edited February 2, 2005 by Forcefed

[blueshee03]

i think its possible but hard to do.i run a motor that is all stock except for a big reed conversion,mild port work ,milled head,toomey pipes and 34pj's and at the time they dynoed it it was putting out around 82 hp on gas.

[1800bigk]

wow those are some nice numbers

[Forcefed]

wow those are some nice numbers

316536[/snapback]

 

Thanks....wonder what kind of #`s the bike was puttin down when it was being sprayed this summer ? ....not that #`s really matter at all anyways.....

[23champ]

Jeff Weindorff of Fast Racing has a 350 drag motor on alky that has put out 98hp several times on the dyno. probably somewhere around high 80's to 90 on gas. Race Gas that is.