tether install

[banshdog]

Hey guys,

 

My brother bought a tether for his 450, same one i have (cheapo) no instructions included. Just 2 wires.

 

Unsure of where to wire it in at. Anyone done it before? Know someone who has? Know how to do it?

 

Any help is greatly appreciated.

 

Thanks all.

[Wallrat]

Do a search over at www.yfzcentral.com. I got the pro design one and installed it but I don't remember offhand which wires I tied into. If I remember correctly you find the wire bundle down under the oil res. and follow it up to where it splits. One of the wires in the split is green if I remember correctly. You splice the long wire from the switch onto that and then ground the other wherever is convienient. Just doublecheck the color of the wire, the rest should be accurate.

[SICK BOY]

Look into it,but usually you can splice one wire to the hot side of the coil,and ground the other wire.

[banshdog]

Thanks guys.

 

Found a post over there, something about red and white wires. will give that a try later.

[fromygod]

be carefull with the YFZ. buddy of mine let his friend just hack one on and grouned the wrong wire.The result? fried ignition system. im pretty sure there a COP (coil on plug) setup on there so just do ur homework and be sure.

[banshdog]

We tried a few "guesses" glad we didnt fry anything.

 

Found something on yfz central. follow the wires up from the oil tank and splice the two wires into the red and white wires. works fine.

 

thanks for the help guys.