87sheerips Posted December 7, 2004 Report Posted December 7, 2004 (edited) Well, i was re-installing my caliper after sending my chain thru the case. Im done with the rebuild but the rear caliper is rubbing against the rotor in a certain spot on the mounting bracket. I think the bracket might be bent from the chain incident, which did some tweaking of the rear carrier, etc. everything else is straight and rebuilt. heres a couple pics to help Edited December 7, 2004 by 87sheerips Quote
87sheerips Posted December 7, 2004 Author Report Posted December 7, 2004 another shot of the caliper frame mount Quote
mat Posted December 7, 2004 Report Posted December 7, 2004 See if the brake disc is bent by putting a jack stand under the rear carrier and rotating the axle. Use a dial indicator if you have one. Next I suggest checking the distance between the caliper mounting tabs and the rotor. These should both be the same. If not, use a hammer to adjust them. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.