sredish Posted November 14, 2004 Report Posted November 14, 2004 I was at Wal Mart and grabbed some Mothers polish. Didn't check it before I left. It's the "Mag & Aluminum" polish. The instructions say, "Not recommended for gold plating, chrome, anodized, painted or coated metals". So, I guess I'll have to take it back to use on my Ceramic Coated pipes. I have some Blue Magic, I'll probably just try that stuff again. Anyone ever use the Mag & Alum. polish before? I'm not too experienced in the polishing department. Later. Quote
racer Posted November 15, 2004 Report Posted November 15, 2004 heres a tip. juck up the carrier on your quad. then start it and let it idle in second gear with the wheels off of the ground. then use your usual polishing method, but with less work. dont have to move your hand much because the wheel itself works. Quote
2004LEBanshee Posted November 15, 2004 Report Posted November 15, 2004 MOTHERS IS THE BEST!!!. I have tried everything. It makes my silencers like crome. You wipe it on and keep wiping and it will turn black. Then wipe clean and BLING!!. I use it on my chrome too. Quote
sweetshee4312 Posted November 15, 2004 Report Posted November 15, 2004 so can i use mothers on my crome fattys? Quote
RNBRAD Posted November 15, 2004 Report Posted November 15, 2004 Absolutely sweetshee. Sredish try it in an inconspicuous area first. I bet it will work. Of course i've never seen any ceramic polish, so your probably going to have to compromise. Quote
FadedDreams Posted November 15, 2004 Report Posted November 15, 2004 Even in the instructions i got from Jet-Hot,they say to use a non abrasive aluminum polish.Wenol,Wax Shop,Mothers,or Never Dull,any of those is what they reccomend. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.