mattbut Posted November 2, 2004 Report Posted November 2, 2004 i was hoping someone could help me out , i just recieved my new fatties ,i need to know if i have to use the old clamp that joins the pipe to the stinger tube ,or will the silicone seal it .i have trial fitted them and they dont look like they will move anywhere without the clamp on . do you think i should put one of the old clamps back on. thanks Quote
FIRST BANSHEE Posted November 2, 2004 Report Posted November 2, 2004 you need the clamp to prevent an exhaust leak, if you don't mind the leak don't clamp it Quote
Ducman Posted November 2, 2004 Report Posted November 2, 2004 I recommend these O-ring type seals. They look really clean and are a good price for a high quality billit seal. I had to trim some length off my stinger tubes to make them work on my Rockets but the seals wern't made specifically for Rockets. Quote
KRMit Posted November 2, 2004 Report Posted November 2, 2004 A cheap fix would be to go to an automotive store and get 1" heater hose. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.