SHEE00MAN Posted September 14, 2004 Report Posted September 14, 2004 I've adjusted the lever as tight as i could and it still jumps when i put it in gear!! I looked at where it connects in the back and i have no clue on what else to do. Thanks Quote
pimpeinkc Posted September 14, 2004 Report Posted September 14, 2004 oh, so sorry to bring the bad news. just kiding, it sounds alot worse than it is. you will have to pull the clutch cover though, on the side of the brake pedle. you can drain the case or turn it up on its side, which is what i do. get to the clutch, turn your handle bar adjust all the way in. break loose the lock nut in the midle of the clutch, i think it is 10 or 12 mm turn the phillips screw in till your clutch lever which is in your case, the other end or the cable from the handle bars has lined up with the case mark, there is a arrow on the lever and on the case, your clutch should start to dissengage at that mare and the spring on the lever should return the lever"in the case" about 1/8 inch behind the mark. if that don't work take it apart and inspect all componints. make sure you check it before putting it back together Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.