trigg Posted August 24, 2004 Report Posted August 24, 2004 my shee sits quite low at the back. its a wp rear shock so i am wondering what lenth is a standard shock trigg Quote
FireHead Posted August 25, 2004 Report Posted August 25, 2004 I want to say its 15.75", but that a guess and sometimes I make things up when I don't know the right answer. Quote
Blue Duece Posted August 25, 2004 Report Posted August 25, 2004 stock ride height is 12 inches the desired heigh is 9 Quote
trigg Posted August 25, 2004 Author Report Posted August 25, 2004 i need the physical messurment of the shock it's self Quote
DUNEDEMON Posted August 25, 2004 Report Posted August 25, 2004 From which 2 points? Fully extended? Fully compressed? Quote
FireHead Posted August 25, 2004 Report Posted August 25, 2004 I'm pretty sure my guess was form eye to eye fully extended. Quote
trigg Posted August 25, 2004 Author Report Posted August 25, 2004 eye to eye fully extended thanks Quote
DUNEDEMON Posted August 25, 2004 Report Posted August 25, 2004 Just went and checked, I have one off a '97 and it measures 13.5 inches or 343mm center of eye to center of eye... Quote
FireHead Posted August 26, 2004 Report Posted August 26, 2004 I'm glad someone went and checked. My guess was pretty far off. Quote
trigg Posted August 26, 2004 Author Report Posted August 26, 2004 thanks for that the WP shock is 13.5" and the PEP shock is 14" the next question is why does the back sit so low are there different shock linkages to change the height, today i have sent my shocks off to be rebuilt so i hope that helps Quote
DUNEDEMON Posted August 26, 2004 Report Posted August 26, 2004 I do believe there are different linkages for the rear, but spring rate / length / pre-load will all affect the ride height. A rebuild by itself will not. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.