Head Milling/adv. timing

[87sheerips]

Im sending my motor to get rebuilt, and am wondering how much I can look to be charged to get my stock head milled, along with my timing advanced, please respong asap, thanks

[BdBanshee]

I charge $35 for the head, and $25 to advance the timing.

 

Hope this helps.

[87sheerips]

what kind of power difference will i notice with a milled head and say 4 deg. adv. timing with my mods listed below

[BdBanshee]

Between 4-5 more HP, should help it get off the bottom quicker also.

[BeJay]

I was wondering I just bought a banshee off this kid and he wasnt sure what all was done to this thing. First the compression checks around 150PSI and the head has been sand blasted, anyways on to my question, It makes a wierd clicking sound I can hear it when i am idling does it do that when the head has been shaved or can I rule that out?

[pimpeinkc]

first, is this your first banshee? second, a shaved head should not make a clicking sound. i have noticed my bike does make a noticeable sound when at idle, but it has always.

[BeJay]

No its not my first but I just got this one a week ago and the one we already had we just put a cool head on 2 days ago and it is now making the same sound.

[Big Blue]

clicking may be coming from the clutch somewhere, or probably the water pump.

[BeJay]

Do you think that I might need a new water pump it also is making this sucking sound after I shut it down, I checked my coolant and it needed a little but it is still making that damn sound. I am just worried that I am going to be out some where and my bike is going to break down. And I havent ever heard anything like that before.